Wednesday, June 14, 2017

Love, Pain, and the Finicky Audio Gods (final update, Sunday June 18)

I fell in love from the first moment, opening the clean and nicely packed box.  The sound exceeded my best expectations: clean, organic, potent, now even FM (which I digitize for DSP) sounded high definition.  Digital files from my Sonos system now sounded as good as the best high definition discs played on my Denon DVD 9000.  Wow was this a good choice, I felt about the Audio GD Master 7 Singularity for the first 5 days.

As they say, it's not love unless it sometimes hurts.  The hurt began on the 6th day, when I was setting up sound for the living room TV for a party.   Sadly the Tact requires me to cycle through the 5 main digital inputs rather than just press the one I want (note: it is always best to provide a button for each input, rather than having to cycle through).  As I hit #2, which connected to my HDMI Audio stripper (which strips the audio bitstream either directly or converted to SPDIF, they both work the same for me because the Oppo BDP 95 which provides the video is set ONLY to output SPDIF) the most horrid snapping sound emerged.  I quickly pressed the Digital Input button again to select the next input.  Of course in addition to being scary it was embarrassing.

It was a chamber of horrors, each inactive or disconnected unit connected to the Tact delivered a very loud, potentially system destroying noise.  And when I started I had only 2 out of 5 inputs active, and the Oppo source (fed through about 65 feet of RG6 cable from the kitchen) was not fully started yet.  And sometimes the lights on the Tact aren't very clear, so it's not clear which input has actually been selected (sometimes it looks like several inputs have been selected, because the Oppos is low to the floor, and may need some internal repairs).  After a couple cycles through I made it back to the safe Sonos digital input which I had been playing for 5 days, but decided in future it might be best to switch to an unused input on the Master 7 itself.  I tried that and that worked perfectly, selecting any unused input on the Master 7 itself gave me perfect muting immediately.  But to get there, I had to crawl on my knees around the Acoustat where there is very little room.  But I soon mastered that task.

Now during this party, I played the movie sound from the Oppo, it might have been 48k or 44.1k.  There was no problem at all.

Also still at this time, I had the Master 7 hooked up via the coax input number 3, using the same AES to Coax converter as I had always needed to use before with the Audio GD Dac 19 Anniversary, which I had purchased a couple years before.  (Actually, I was first using the Dac 19 with Toslink, because the Behringer DEQ has Toslink and AES outputs only, and no coax, and I thought the optical isolation from all my noisy digital stuff might be nice.  But later I found the noisy digital stuff was not a problem at all for the digital coax, and the Toslink had such poor definition I could not read the jitter on my digital audio tester, whereas the coax had effectively none, I could connect earlier in the chain and get the exact same jitter number.)

I had not once ever had a muting issue with the Dac 19 anniversary.  If I selected an unused input in the Tact when I was using the Dac 19, it simply muted without a sound.  I had heard people warn me that with an Audio GD Dac I might have muting problems, but I had none at all with the Dac 19.
Other Dacs I have running might clink as the kHz light goes out, but no dacs I've had in the past also have done anything but always mute perfectly, no matter how complex the input chain.  Because of that muting, however, in the living room system, if I erroneously selected a bitstream output, I would simply get nothing (and not the terrible noise you get on some systems).  So I was completely shocked and unprepared for the strange noises I got at the party, but there wasn't any more technical delay than usual.

The movie party (3 videos) went OK, but not without blowing one speaker fuse, and hurridly finding one in my "laboratory."  I was grateful I could find one in just a few minutes, I hadn't needed a speaker fuse in a long time, I had fancy $49 (discounted to $29) audiophile speaker fuses too.  I was afraid I was going to have to use another of those, but then I found my package of 5A fuses from Radio Shack.  I looked online to confirm the Acoustat needed Slow Blo.  Problem #2 solved.  BTW, the speaker fuse had blown sometime as the Oppo went into stop as the movie was ending.

After the party I found that by removing rarely used inputs and simply capping them with shorting plugs I could stop the noises from unused inputs.  Problem 1 solved!

But then I also finally got around to actually installing the AES cable directly from the midrange Behringer DEQ to the Master 7, bypassing the need for an AES to coax converter.

Now this was different, I thought I'd try an unshorted input again, and now, no noises!  Somehow changing to the AES input of the Master 7 had eliminated all the lack-of-muting noises I was getting with the SPDIF cable.

So, shorting plugs no longer needed!  I could plug the unpowered units back in again too.  Problem 1 solved even better!

However, the Oppo still appeared to be a problem.  After I had played all the party videos on the Oppo, at the very end, relays clicked as the drive stopped, and the Krell amplifier shut down, for the first time since it had come back from Capacitor Service at Krell in February.  I dared not try the Oppo again.  I could probably live without a direct SPDIF connection between the Kitchen Oppo and the Living Room system, I thought then.

Something didn't seem right, however, with the sound after the party.  Now I didn't seem to be getting the new warm and organic sound of the DAC.  It sounded more edgy.

Then I remembered that just before the party, I changed the polarity menu option in the Tact to Normal.  I believed that had been part of an incomplete test during the first few days.  So maybe THAT was part of the magic.

I changed the polarity option to Inverted, and now I was getting the good sound again, it seemed.  (I wrote about this in an earlier post).  To confirm my suspicions, I downloaded a polarity test called Speaker Pop, and found that, indeed, the polarity of my system was correct only if I selected the Inverted option on the Tact.

I did not believe or want to believe that my new jewel, the Master 7, was inverting the polarity.  I figured this was just a long standing problem with the Acoustat speakers themselves.  I had previously gotten ambiguous information from the Tact's own impulse test program as to the polarity of the Acoustats themselves.

So a day later I removed the Denon DVD 9000 from my rack, and turned it into a DAC by turning the front panel INPUT knob to Coax.  I ran the exact same signal (from Sonos to Tact to Behringer DEQ) but also through a commercial AES to coax converter (no, this is not going to invert the signal polarity, which is a property of the data not the carrier) into the Denon, and its output showed the expected correct polarity, that is whatever I had selected by the Tact polarity menu.  The unbalanced outputs of the Master 7 showed the reverse.  But what about the unbalanced outputs???

I found I had no XLR adapter that would let me connect XLR to my scope.  (I ordered one from Markertek but didn't have it until later.)  But right then I figured out a cheat.  I could simply touch the positive probe to the positive output on the Krell.  The Krell is certainly not inverting, and simply reflects the polarity at its input.  I found that the polarity on the Master 7 XLR outputs matched that on its single ended outputs in being the reverse of the Denon and the reverse of whatever I had selected in the Tact.

I also discovered something else: I had sometime a few months ago put the subwoofers in different RELATIVE polarity.  And the subwoofers own PHASE control didn't seem to help.  I figured out a way to fix that.

By now I was really really liking the sound.  I was playing the Crystal Cables sampler from SACD which I had analog resampled to 16 bit digital.  But not playing very loudly, one track caused the Krell to shut down again.  I was simply playing this from the Sonos Connect digital output routed through 9 feet of RG6 cable to my Tact.

Hoping that I could keep my new DAC and work around this problem, I made made new Teflon twisted pair speaker cable to replace the super low inductance but relatively high capacitance Canare 4S11 speaker cables.  The Krell still shut down.  So I then also replaced the Baldur XLR cables that connected the Master 7 to the Krell with Belden 1800F cables.  THAT fixed the shutdown and I was even able to boost the playback level 12dB and play the track over and over.  I thought all the problems were now solved.

I had been thinking, however, that the Oppo sounded better when my system had inverted polarity.  I didn't know whether it was safe to test the Oppo again.  But since I had switched to AES input, muting hadn't seemed like a problem, so I made a recording of the SpeakerPop sound, and put it in the Oppo.  After the track had already started playing, I changed the source selection on the Tact so the Oppo was now selected.  I started at a very low level and really had to crank it up.

No, sadly, my second big polarity guess turned out to be wrong.  The Oppo had correct polarity.  I tried the disc in all my other players, and they all had correct polarity also.  I had been thinking the Integra Research RDV-1 had incorrect polarity just like the Oppo.  Nope.  That makes one good guess out of three so it really looks more like I can't identify polarity than otherwise.  The Sony DVP-9000ES would not play the CDR I had burned on my Lacie, and I'm not sure if it generally has the ability to play burned CD's.

In testing the Oppo, I also wanted to see if the polarity selection in the audio menu made any difference.  It was somewhere doing this, messing with the audio menu in the Oppo, that the Krell shut down again, for the first time in several days.  I had been hoping I had fixed the problem by running an AES cable to the Oppo, but apparently not.

During one of the polarity tests on the living room disc players, the Krell also shut down.  And later, when I was playing the Pioneer F-26 as digitized by the Lavry (for better fidelity than when I usually digitize it with Sonos) the Krell shut down.

These later shut downs were beginning to surprise me.  They didn't seem to be related to any faulty muting on the DAC, as previous ones had been.  But now I thought of something else.

I now figured that the reason for the shut downs was specifically that the Krell was trying to upbias and there is insufficient AC power.  This is one of two possibilities when the Krell automatically shuts down but shows only the "power" light illuminated.  The other possibility is that the speaker or cable has shorted.  I had pretty much ruled out the second possibility long before, the speakers were still working after all (thankfully!).

Now it didn't occur to me at first there was anything I could do about this.  I have a single 20A dedicated line for my entire system, but not for just the Krell (as Krell recommends).  But then I figured out how to do it.  I could power the subwoofers on a different circuit than the rest of my audio system.  Inspired, I set about doing it, and in just a few minutes I had moved cords around so that both subs were plugged into the regular living room circuit and not the 20A audio circuit.  This would leave only the low power components on the same circuit as the Krell.  I didn't want to move THEM to the other circuit because that circuit is incredibly noisy as it also powers the front yard photocell operated lights, and they put tons of noise on the line.  But the subs have digital power supplies which aren't affected by that.

This made a huge difference right away.  Now I could play jazz and indie rock on FM through the L-1000T through the Lavry instead of Sonos, and run it that way all night long.  And I did that just to be sure I could do it.  Problems solved!  Or so I thought.

It still bothered me a lot that I couldn't play the Oppo.  I was thinking, maybe if I activated the PLL jumper inside the Master 7, it would keep the Master 7 from responding in a very bad way to sampling frequency changes and muting from the Oppo.

Just to be sure this was a good thing to do, I emailed Audio GD, and I also emailed a friend.  Neither response really answered my question, however Kingwa said that the default is NO PLL (which I was somewhat uncertain about) and the digital receiver is ALWAYS ASYNCHRONOUS.  Those two bits of information were very useful.  But Kingwa also said I should not be running SPDIF longer than 10 meters.   I replied that I had been and still do run lines 50 feet (actually, 70 feet) with other DACs with no problems at all, and other people I know run SPDIF lines as long as 120 feet.

My friend had only used I2S and he always runs the DAC through his preamp first.

I'll express my strongly negative feelings about I2S in a future post.  Meanwhile, I simply went ahead and changed the jumpers for PLL and tried the Oppo again.

This was different or so it seemed.  With the polarity correct, and PLL enabled, the sound was superb, better than I remembered it going back to the days when I first had the Oppo and Denon 5900 plugged straight into the Lavry into the living room.  The glare and haze had disappeared, leaving the sound a bit darker, but far more real sounding, and with punchy bass.  I was playing the Santana Supernatural DVD-Audio, sending 24/96 across my 70 feet of cables into the living room, and it was great.

Problem solved!  I cranked it up and started grooving.  A half hour went by.  Relays inside the Oppo were clicking on every track, making other DACs mute, but there was not a sound from or through the Master 7.  It was now muting and changing sample rates and everything over a 70 foot cable at 24/96 without a hint of problem.

But then, 40 minutes later, the Krell shut down again.

OK, so maybe I can't use the 70 foot spdif cable anymore.  I started thinking of other options for my monthly party, such as running the Oppo audio through my team of Sonos zone players in every room.  I wouldn't be able to get high resolution, but it would be OK for movie sound.

Feeling somewhat down, I decided simply to listen to a cassette I had recorded in the bedroom from an FM local broadcast the previous week.  Piped into Sonos in the bedroom and back out in the living room in glorious 44.1/16 digital piped through my system.  Pure sonos connections had NEVER been a problem with the Master 7, in 2.5 weeks to this point, so  I could just relax.

But this time, after about one hour, the Krell shut down.

Now it was beginning to dawn on me.  Something had changed since the Party, and it was not just the fact that I had switched to AES cable after the party.  (Actually, in another set of breathless tests I performed earlier, I had switched back to Coax hoping that, despite the muting issue, perhaps it handled other things better.  It did not seem to, and I got shutdowns using Coax just like using AES, and the sound wasn't any better either.  But correcting the polarity made a big difference to the sound.)  It was because, at the party, the loud noises had caused some permanent change to the speaker.  Most likely the HF transformer inside the Acoustat interface had an intermittent short.  That's how these things start.  You get a tiny short and then a fuse blows.  Then, the fuse blows more and more often as the short gets bigger.  Except, in my case, the Krell FPB is so clever it can figure out when the speaker is shorting, and shut down before the fuse has a chance to blow.

THAT was what had been happening all along, ever since the night of the party, I now concluded.  I have at least one bad transformer in my Acoustats that needs fixing.

So to test that, I first ran the left speaker playing FM through Sonos, just as I had done the night before with a cassette tape of an FM broadcast.  I played louder and louder on the left channel, but after 90 minutes the Krell had not shut down.  Back to the right channel, I played FM through Sonos again through the right channel, and in 20 minutes the Krell had shut down.

So I have proven that there is a problem with the right speaker now.  THAT was the only speaker to blow it's fuse at the party, and the issue probably started right then.

So that could explain everything.  Perhaps now using the AES input I will have no more issues with the Master 7.  But it still seemed that PLL helped me get the Oppo to play much longer and sound better, so I'm going to keep PLL enabled.  Likewise for the other changes I made, replacing the Baldur XLR interconnects with Belden 1800F, and putting the subs on the other circuit.  Those changes were all for the best anyways.

I remember now that I had long ago had the same trouble playing the F-26 and L-1000T tuners as digitized by the Lavry AD10 instead of Sonos.   The few times before I had tried to do that, the Krell had shut down.  I figured maybe the tuners had too much low frequency noise resulting from the FM tuners, I just couldn't do that.  But now I think the problem was that I was putting both the Krell and the subwoofers on the same circuit, and the Krell was trying to get more current on some peak and competing with the subs for that power.

So while it's possible that all the shutdowns I saw resulted from a growing transformer short in one speaker, it also possible, and it was part of the reason this took so long to figure out, there there were actually more than one cause, and probably two, for the shutdowns.  One being the transformer short, and the other being inadequate AC power.  At the end of the day, though removing the Baldur cable seemed to help playing Taguita Militar, that might have really represented the "inadequate power" scenario because (1) it happened consistently over and over at the same point in the track, and (2) in addition to extreme highs, that recording also has deep powerful bass, in alternation, creating the situation where the Krell and the subwoofers were competing for AC power.

I haven't actually proven the left speaker does not have a problem, it just didn't show up in 90 minutes of pretty loud (not extreme) testing.  I will continue testing the left speaker and go back to using the Audio GD DAC using the safer AES input with PLL enabled (belt and suspenders) but meanwhile record the right channel output using a Masterlink at 24/96 so I can see problems up to 40kHz.

The interface which blew was the original interface that came with the speakers.  It's brother was already replaced in 2010 with a spare new old stock unit in museum quality which happened to appear on eBay exactly when I needed it.  The unit which has not yet proven to be defective on the left channel was that new old stock unit which I have now used for 7 years.  It has a much later serial number.  So there is hope that it survived the cruelties of the past few weeks.

Ironically just a couple months ago, the leading Acoustat interface refurbisher posted to The Audio Circuit that people should not use 5 amp slow blow fuses anymore.  That recommendation was even a bit risky in 1980, but in 2017 many power amplifiers have enough voltage and current to blow a transformer before they blow the 5 amp fuse.  Actually, Dr. Strickland originally specified 3 amp slow blow, as that had a decent chance of protecting the speaker in most cases.  But there were so many complaints of unnecessary fuse blowing, he gave in to pressure and changed the specification to 5 amp, which would stop most, but far from all catastrophic events.  That just barely passed muster with the 200 watt amplifiers of 1980, but not the 500W amplifiers of today (my FPB 300 actually has 600 specified watts at 4 ohms, and more like 900W at measured clipping, and over 1500W into 2 ohms, mind you, it's so smart it stops the moment it detects a short, making no foul noise in the amplifier or speaker, but it doesn't necessarily stop full power signals into a not yet short).

I went to what was described (and seemed) like the last Radio Shack store in San Antonio to get a collection of fuses, I'm not actually sure which is best, 3a slow blow and 5 amp fast blow, however they didn't have 5 so I got 3 and 4 amp in fast blow.  But I'm using 3a for now.

I played the Left speaker by itself for hours Friday night, playing FM mostly through analog Sonos, not wanting to extend the experiment too far.  But by Saturday I was testing the Dac 19 through system connections to the kitchen Oppo, including 70 feet of Belden RG6 for coax SPDIF.  It was working fine.  I had hooked up one of my DEQ's as a monitor meter (having level and spectrum peak hold, etc etc) and saw nothing wrong,  Santana Supernatural DVD-Audio through the Oppo.

After several days testing to prove the fault with one speaker, and so far only one speaker, I hooked up the Master 7 again.  Now I didn't power the amp yet, I just used my DEQ monitor to check out all the inputs on my Tact.  Everythng was working flawlessly, and no spurious crap, EXCEPT using the Kanex HDMI de-embedder to strip SPDIF from a standard HDMI signal (in this case, from the Oppo BDP-95 set to only output PCM up to 96kHz).  Using the de-embedder in both modes gave a signal with periodic low frequency bursts up to -10dB apparently going down to DC.  Even though off, the Krell seemed to be making noises like it was detecting DC at intervals.  Somehow the likely high jitter of the HDMI signal (which itself comes from a CAT6a house network) is overloading the jitter removing capacity of the Master 7, and the result is bursts of low frequency which would not be good for directly feeding DAC into a DC coupled amplifier.

Well anyway the HDMI de-embedder has always been a troublesome piece.  Quite often I have found it not to work on either position.  But I have never noticed DC pulses.  Still, these -10dB pulses were nothing like the high pitch max level shreak I heard the night I first selected the de-embedder to play the Oppo output at my party.  So from destructive shriek to quasi normal operation with bursts of DC is some progress anyway.  But I'm simply not using the de-embedder now for sure (except testing purposes as it clearly makes an interesting test).

But testing further I also found something to work which had never worked before.  Playing Reference Recordings 88 kHz data discs on the Oppo!  I had run into a brick wall with these discs, they can be downloaded to my kitchen mac, but the only network available from there now (I've de-certified the part optical connection to living room) is Sonos, which doesn't do high rez.  So I had to laboriously convert each file to 44.1kHz, which I did for one disc, but I have others that have been sitting there, and I've never enjoyed the original high rez.

Bnt now I can, now that these 88kHz discs play perfectly on the kitchen Oppo, over 70 feet of RG6 wire (actually in several segments, one going through the attic), into the Tact where it gets level adjusted, output through the Tact AES output to the DEQ, and from there by AES to the Master 7, now it all worked perfectly and sounded wonderful, much as the Santana Supernatural DVD-Audio sounded better on the Kitchen Oppo digital output than ever before and ever through any other of several means I have to play it (but, the Integra Research RDV is extremely troublesome on this disk, it goes through various broken frames of garbage and takes persistance to play the DVD-Audio, so much so, I've given up.  I'm getting another Denon DVD-9000 which is said to have full DVD capability, hopefully full DVD-Audio capability, and I now think it sounds much better thank than the RDV at the analog output anyway.  Speaking of which, before I use any new analong input now, I think I'll certify it as OK by using the Behringer as a monitor as I just did.  (I used the supertweeter DEQ on top as monitor, turning off everything related to the super tweeters and disconnecting them from the DEQ, then changing it to simply monitor the analog input connected to the XLR output of the new unused channel of the Master 7, I've got glorious mono now that one of my Aoustats needs repair and my spare interface in storage was never repaired either.  But I believe I will have my other Acoustat back online before long, better than ever.)

Don't let 'em tell you it can't be done.  For me, it seems AES input does the trick, even if there's an intermediate length of SPDIF back to the source behind that AES.  And I'm not really sure if PLL is helping, but it seems to be working for nearly everything, and I think it prevents stuff from going badly awry,  and sounded better to me.  Now I'm back to the rock solid digital connections I had before, mostly, with one more important one and one less unimportant one.

So now I just need to get one of my Acoustats fixed.  But that's not a problem, as they say, it's an opportunity.

A lady friend of mine knew the explanation right off.  You get expensive new toy, the old toys get jealous, they want money spent on them.


Sunday, June 11, 2017

More AC Power, Please

I was just feeling warm with the incredibly ware, rich, natural, grainless, presentation with all the latest changes, including polarity fixes.  Then, last Thursday, the Krell FPB 300 shut down with only 1 light.  The manual says that means shorted speakers or cables, or insufficient AC power.

I run my entire stereo on a 20A dedicated circuit with 10G wire, but not specifically the Krell.  I see now that Krell recommends running the 400, which mine in power already effectively is (when they fix everything, they set it to the 400W program, the 400 and 300 they've always been the same anyway, except for Cast input and other input board changes.

The ultimate peak power doesn't change, but the ultimate bias levels permit 400W class A at least for a very short while (it can't do that for long, the temp will rise above the cutoff and go back to Plateau 2).  This is a lot of power.

Anyway, I also was somewhat worried about the new Master 7 Singularity DAC.  But after much trouble, I finally figured out how to test the XLR offset DC voltage, and there was none (though both + and - were 0.5v above the ground pin, which should be OK).   There might be other issues, but before finding my wonderful new dac unusable I should investigate less expensive possibilities.

I also (finally!) wound a set of new PTFE speaker cables from solid core teflon coated silver plated copper milspec wire I bought on ebay.  I used that the replace the Canare 4S11 speaker cables I had custom made by BlueJeans.  The Canare is low inductance and high capacitance.  This maximizes any peaks, and can set unstable amplifiers oscillating.  The Krell should not be unstable at all, but the draw of the cable is almost like a short at super ultrasonic frequencies, perhaps that is setting the Krell to anticipate the maximum bias level, even though I was listening at -15dB.

Whatever, I decided I also didn't like the screw on terminations, just the slightest looseness could cause arcing.  So I decided I was moving on, but not to the old junk but to the new project I hadn't gotten around to for a year.

So I put on the wires, ran the same song at what I thought was the same level (I had briefly turned it down, I couln't remember exactly what it was originally).  And, halfway through the song, the Krell shut down again.

OK, so now I tried replacing the Nordost Baldur 0.6 meter input balanced wires.  Now, no shutdowns, no shutdowns at louder levels, I raised levels all the way up to an earsplitting -4dB on this song (which has very impulsive flutes and metallic sounds, drums, etc, an audiophile recording which originated on SACD which I digitized to 44.1 to play on my Sonos system.  It's "Taquita Militar" from a Crystal Cables sampler.  It's a very tough high frequency test on an extended bandwidth system.

Anyway, so dumping the $500 audiophile cables (which by conventional standards should be OK, just slightly higher than normal capacitance, and extremely low inductance, and supposedly vanishingly now propagation delay) have fixed the problem.

(BTW, Baldur was discontinued by Nordost several years ago.  Perhaps a lot of people had trouble with such a fast interconnect.)

But I still think, if I had more AC power, perhaps the Krell wouldn't have shut down but actually rose to the challenge of the highest bias level.  Even free of the Baldur cable (though, I think I'll be trying some ohter things.  I've ordered Belden 1800F cut to length by Blue Jeans, and I'm looking into some other PTFE cables cut to spec).

Mind you, I don't really know if the problem is inadequate AC power.  But a friend of mine thinks I have so much equipment it shouldn't all be on once circuit, even 20A, and that is correct.  I should have at least 2 and maybe 4 circuits to be fully audio grade (each sub on it's own dedicated circuit, as well as the krell and the conditioner).  And with balanced connections to the Krell it won't hurt it to be on a different circuit, and the Subs already have balanced connections to their DAC (an Emotiva).

Friday, June 9, 2017

Polarity !

For a number of years now, I've disappointed a friend of mine by disbelieving in the crucial importance of Absolute Polarity (both stereo speakers having the same correct, vs incorrect, polarity).  Nobody disputes the importance of Relative Polarity (speakers having the same or reversed polarity relative to each other) because it causes easily measurable bass reduction, but Absolute Polarity has no frequency spectrum consequences, and the best research published in the Journal of the Audio Engineering Society suggests that Absolute Polarity (which I'll mostly just call "polarity" in this post) can pretty much only be heard on test tones and solo brass instruments on headphones, and once you get beyond that testing music with larger ensembles or loudspeakers in a room the more complex texture of the music and/or room reflections confound the accurate determination of polarity by listeners.

I've still had enough respect for polarity (which is easy to measure in most equipment) to always try to get it right, but not so much that I've bothered to assess polarity differences among recordings subjectively, as my friend does, as he claims that 92% of all recordings have incorrect polarity, and sound best when a system is set to invert absolute polarity.  He has made lists of which recordings have correct polarity and which don't.  He has made similar lists for equipment, also claiming that equipment which inverts polarity is very common (my tests do not show common polarity errors in equipment, including many of those my friends claims are wrong, and equipment is easy to measure in this regards).  The lists are entirely based on listening tests, not objective measurements.  I've been thinking it ought to be possible to assess the polarity of at least some recordings by visually inspecting the waveforms of brass instruments, for example, but I've never thought it important enough to try.  I have also believe that nearly all audio devices preserve absolute polarity,  which has proven true in the past for the small number of devices I had chosen to measure (with the exception of an early iPod).

I may be taking polarity more seriously now, after it appeared that incorrect polarity was making my system sound worse than correct polarity.  And now my measurements have revealed that both of my Audio GD DACs, my DAC 19 as well as my new Master 7 Singularity, invert polarity.*  I was especially shocked to find that the Master 7 Singularity inverts polarity at both the balanced and unbalanced outputs.  This appears to be no mistake.  It suggests that Kingwa shares the belief that my friend has that most recordings sound better in inverted polarity, so Kingwa has simply made inverted polarity his standard polarity.  It would not seem possible that this resulted from oversight, when so many other details have been attended to perfectly.

(*The DAC 19 has a "setting" button which corrects polarity when pressed in.  I was considering the "out" position to be the default, and always kept it that way, but apparently to be "in" correct polarity you need to press the button in.  The Master 7 doesn't have a polarity button, which my friend has always considered a fatal flaw.)

Well that's OK, I suppose, for those who just hook it up and listen, but what's not OK for someone like me who is keeping score is not to know about it.  But now I do, after a week of audio experimentation and discoveries (ultimately leading to the best sound I have ever had).

Back on the first day I hooked up the new Audio GD Master 7 Singularity, I wondered whether the balanced XLR outputs were hooked up the "normal" way (with pin 2 hot) or the "old" way (with pin 3 hot).  So almost after hooking up the dac I tried using the polarity controls on my Tact 2.0 (now hidden in the Polarity menu).  After switching to inverted, I decided to leave it that way for awhile.  Then by the next day, I had forgotten about this setting, and left it that way, during all my rave reporting on the Master 7, until the next Sunday when I had to set up the A/V for my party.  Then I noticed the inverted polarity setting, and changed it back to normal.

But after the party, something was clearly Not Right.  The wholesome sound of the previous week was gone.  Now the sound was just edges around where the wholesomeness had been.  As if the whole had been just sucked out.

Here I should explain that most of the time, and more than anything else, I listen to the local classical FM radio station.  And I do so...using my Audio GD DAC...because all analog sources in my system must be converted to digital for DSP processing, which does room correction and crossover for all the speaker drivers.  The analog output of my Pioneer F-26 FM tuner (one of the best, of course) is converted to digital either by Sonos (using the INPUT jacks of the CONNECT or ZONEPLAYER) or by my Lavry AD10.  For many years I had only listened to FM through Sonos, taking the digital output either on the same or other zoneplayers.  Somehow, when I tried the higher resolution connection through the Lavry things never worked out.  But as described in a recent post, about a month ago I tried again, first by setting up a 10 analog input selector so I didn't have to remove any other inputs to get the FM plugged in.  And since it was all done in a fairly open rack, I could make sure everything was being connected correctly, and the variable level set correctly, ultimately resulting in the best FM radio sound of all, first digitized by the Lavry AD10 to 24/96, then passed through my Tact preamp which only selects and sets level (I have room correction bypassed) and then through a trio of Behringer 2496 DEQ's, one for each speaker, and with all digital I/O.  Ultimately, the digital signal originally created by the Lavry and processed by the other devices is converted back to analog by the Audio GD Master 7 Singularity DAC, which drives the Krell FPB 300 through 18" of Nordost Baldur XLR cables.

Since I listen to FM radio as background music more than anything else, it was no surprise that it was this source that I first identified as being "wrong" somehow.  It had sounded so good the week before, so what now?

It wasn't long before I remembered changing the polarity during my party.  And setting polarity back to inverted brought the wholesomeness back.  This was the shocking discovery of the importance of polarity.  But was I setting the polarity correctly by doing this, or setting it inverted?

I wouldn't have time to do an objective test of that until the next weekend.  And it would turn out to deliver many interesting results leading to further improvement.

Although I already have several useful test tones, I decided to download the Speaker Pop app for my iPhone.  The test tones for the app can be generated by the phone itself, but for my complicated system I decided to download the files.  I used the wav file called SpeakerPop-long44.wav.  I first incorrectly burned a disc (as a data disc, which is now the default if you burn from Finder).  I will eventually burn a CD and also a DVD for future testing, but I decided to skip that for now and simply copy the file to my Ztunes folder (stuff which should not be played automatically), updated my Sonos library, and played the file through through the SPDIF output of a Sonos Connect which is itself wired through Ethernet.

The Sonos Connect puts out a SPDIF stream which becomes Input 1 on my Tact preamp which selects digital inputs and sets gain and/or makes other adjustments (I have room correction and EQ bypassed).  The Tact puts out 24 bit digital in AES/EBU format, which goes to a 4 way powered AES splitter from Henry Engineering, which then goes to 3 Behringer DEQ 2496 units, which do the crossover and room correction functions for each driver using only digital I/O using AES input and AES output.  The AES output for the mid range (100-19,000 Hz) used to be converted to SPDIF by an powered AES-to-SPDIF adapter from HOSA, and that used to feed the Audio GD DAC 19.  With the Master 7 I added the AES input option so it can take the AES straight from the DEQ, but I did not set that up right away, for one thing I didn't have any 5 foot AES cables, so I ordered two different kinds which arrived during the week.  Meanwhile I continued to use the HOSA adapter and the SPDIF input of the Master 7, in the same way as I had been using the SPDIF input of the DAC 19.

I was finding it hard to believe that the Master 7 was set up for inverted polarity.  Instead, I was believing that for some reason the Acoustats simply sounded out-of-polarity possibly because of phase shift in the Acoustat patented dual transformer system.  (My thinking now is that this should be minimal.)  For years I had wondered about what appears to be the impulse response of the system as measured by the Tact RCS software.  There is a tiny negative blip before the main positive part of the impulse appears.  Is that tiny negative blip showing that the whole system is out of polarity???  I'd been wondering about that for years and hoping to use some other tools to check the impulse response.  The negative blip could also be an artifact of the Tact measurement, or digital processing in general.

Finally on Saturday night I had time to run the test.  I simply played the SpeakerPop signal on my Acoustats (after shutting down the subs and super tweeters) and tested it with the app running on my phone.  It showed that, after having inverted the polarity in the Tact polariy menu as I had done a week before, the Acoustats were now putting out the correct polarity.

So I had changed the polarity to sound better, and "better" turned out to be the correct polarity.

But I still did not believe the new Master 7 DAC was responsible for the inverted polarity.  I mostly thought it was the speakers themselves that were inverting the "effective" polarity by phase shift.

Or, it could be the input chain: I take the digital output from a Sonos Connect, run it to my Tact RCS 2.0 Preamp through coax, then the Tact is connected via an AES digital cable to a Behringer 2496 digital EQ, which is then connected via an AES digital cable to the DAC.  I don't think any of these invert signal polarity, but I could be wrong.  In particular, the Tact itself HAS a polarity control, so you would think that would reflect the actual polarity, and in my experience it does.

I tried making a disk and playing it through my 1986 Sony CDP 507 ESD cd player, and using the digital output from that player, my reference for polarity stuff, but the disc I made wouldn't play (it turned out to be I had burned the speaker pop file as a CDROM data disc, not an audio CD).

So then I tried sending the digital signal that I had been playing on the Audio GD to my Denon DVD 9000, which can accept external SPDIF digital signals from coax, through an AES to coax converter.  The Denon originally cost $4500 and was a "statement" product by Denon, a brand known for top quality engineering.  You would not think Denon would get the polarity wrong in their statement DVD-Audio player.  I tested the Denon and the Audio GD with my Tektronix 100 Mhz scope.

And the Denon did indeed output the Speaker Pop signal in the correct polarity, unlike the Audio GD.
The Denon is cap coupled, so it shows the speaker pop signal as little positive bursts only a few hundred milliseconds wide.  The Audio GD is DC coupled and shows a step response--going negative then slowly rising up for seconds until the next pop.  I could measure the Audio GD output only at the single ended outputs, so to test the balanced outputs, I hooked the scope to the positive output terminal of the Krell.  Since the Krell is also DC coupled, it showed the same waveform as I saw at the RCA jacks of the Audio GD, so it appears both the RCA and the XLR outputs of the Audio GD invert polarity.

So I have now proven to my satisfaction that the Audio GD Master 7 inverts polarity (or, all my other stuff is wrong), and it is seeming like it is very important to set the polarity correct somehow, as I can do with the polarity switch on my preamp.

I suppose it could be coincidence that I thought the sound was bad, and the polarity just happened to be incorrect at the same time.  Then, when I fixed the polarity, I was inclined to think it should now be better, so there was a strong expectation bias that this would sound better.  But for now I've decided that in my system as it exists today, polarity is important to get correct.  I do now consider this crucial.

*****

Thinking about phono stages, I found myself reading John Curl's description of how Harry Pearson wrongly tested his Vendetta SCP-2a phono stage (which had been retooled to give Pearson the 47k load he demanded).  According to Curl, Pearson's assistant didn't get the instructions and didn't invert the speaker connections to correct for the inversion of polarity in the phono stage as required.  So when Pearson described the SCP-2a as sounding "cartoonish" he was describing the sound of polarity inversion.  And that description indeed sounds like a colorful description of what I heard.

But there's another thing I haven't mentioned so far.  When I was testing the polarity of each speaker in my system using the Speaker Pop app,

I discovered that while the right subwoofer had the correct polarity, the left subwoofer did not.  Now this is no longer the case of absolute polarity it is the more widely accepted problem of relative polarity.  When stereo speakers have different polarities (relative polarity), the bass tends to cancel out, and the imaging is destroyed, especially the center image.

This brought back a few memories and mistakes over the past couple years.  When I replaced the plate amplifier in the SVS PB13 with the new Sledge version (because the original BASH version died) I wrongly connected the speaker lines.  This wasn't a mere oversight, it was complicated by the fact I also needed some new wires SVS had forgotten to send me at first because the connectors didn't match.  I still don't remember enough to remember how exactly it happened, but it did, as I found out after I had the plate amplifier fully screwed in and the subwoofer and everything else put back into place.

So at first I tried correcting the problem using the "phase" control on the subwoofer.  With the new Sledge amp this control is in the digital menus, you scroll through numbers from 0-180.  The problem is, that it doesn't appear to work for me.  I think this is because I don't use the crossover in the subwoofer.  I use my own crossovers upstream.

So back then, I inverted the polarity in the DCX crossover I was using for the subwoofers then.  (I had already migrated to using a DEQ for the Acoustats).

Then, when I redesigned my system to use 3 DEQ's instead of a DCX and one DEQ, I assumed that the earlier connection was because I had been experimenting (as I had at one time) with an out of polarity operation in one subwoofer to help remove bass boom caused by room modes.  That experiment was not deemed successful for very long, but I had forgotten to undo the change made for it, or so I thought.

But you see, that wasn't the real story, the reason why I had inverted the polarity of one subwoofer in the DCX was because the plate amplifer is internally connected out of polarity, which can't be changed without taking the subwoofer out and apart again.

And so it goes, mistakes are made, and sometimes stick around because of additional mistakes.

Anyway, needless to say, when I was working on the absolute polarity issue, I also fixed the relative polarity.  That quickly improved the bass image focus.  Now the sound may be slightly too bassy because I tuned the EQ's for the previous relative polarity difference.  But definitely the bass is more powerful and punchy and has more potential to be great.

It would be good to fix the problem at the source, but the issue of moving the subwoofer out of the corner is now greatly complicated by all the new equipment set up since then.  I figure I'd have to devote a day to the project of fixing the polarity inside the subwoofer.

So I'm back to finding a way to fix it, which could lead to a future mistake if I forget why I did these things.  And it's especially difficult because the Behringer DEQ 2496 does not have any polarity controls (a serious oversight, IMO, along with not being able to adjust gain in 0.1dB increments).

And the Emotiva DAC doesn't seem to have any way of correcting the polarity either.

SO, the trick I do is I do a relative polarity inversion on the whole system using the Tact, and invert the relative polarity again for the Acoustats and the super tweeters, because those speakers are externally wired to their powering amplifiers and can be easily changed.

Now you see it will be easy to make the mistake of forgetting I did all this for a good reason.  Having the cables connected in different polarities at the back of the Krell looks wrong, but it actually correct because it matches the relative polarity change in the Tact preamp.

So here's how it's all done now:

Device, Channel, Polarity (Plus means In Polarity)

Tact, Right,Minus
Tact,Left,Plus

Krell Speaker Cable, Right, Plus
Krell Speaker Cable, Left, Minus

Supertweeter Speaker Cable, Right, Plus
Supertweeter Speaker Cable, Left, Minus

Nothing else can easily be changed.

But since I corrected the relative subwoofer polarity on the same day as I corrected for the absolute polarity inversion of the Master 7 Dac, you could argue that my great sense of how the system has improved since then might be coming more from the fix to relative polarity as from the absolute polarity change.  This would not explain how I liked the system during the previous week with the changed Absolute polarity, because changing the system absolute polarity would not change the relative polarity.  But perhaps I just imagined that, it was a one-off thing, and everything else could be explained by the undeniably large audible change in relative polarity in the subwoofers.

So am I going to do better controlled tests to find out for sure?  The problem is, you never know anything for sure, especially these kinds of things, and I know that hearing difficult-to-hear things on demand like that is bound to be difficult, even though I now imagine the difference is huge.  (I've tried to hear absolute polarity in blind tests going way way back previously without success.  I didn't even know what to listen for except from a lot of self-contradictory descriptions I had heard.  Now at least have one "case" where it seemed extremely important, and while no one should take that as proof of anything, at least I have an auditory idea as to what it might sound like, enough to be somewhat interested in.

As I did before, I'm going to assume that absolute polarity is important enough to be concerned about, but not be obsessed about.  If I think I hear it again, I'll check it out (bad form experimentation, for sure, but more fun).  I'm not going to routinely test recordings before I routinely listen.  I still don't really believe it's so huge as to alway be readily apparent, but more as a thing you might bump into once and awhile.

























Thursday, June 1, 2017

Tuned Low Frequency Traps

I've spent a lot of time reading about "bass traps," by companies like RealTraps and GTK.  Properly speaking these are not tuned traps, they are absorbers, and notably they have less and less effect as you descend from about 80Hz.  By the time you get to 45 Hz, where my biggest room mode is, they don't have much effect, and to get anywhere you have to fill all room corners to 18" or more, and ultimately perhaps every square inch of wall space.

As ineffective as these mass weighted absorbers (typically made with dense fiberglass board) are at deep bass frequencies, foam based absorbers are worse, their effect at deep frequencies is virtually nil.

Well here is something I hadn't seen, actual tuned traps designed to absorb 30-50 Hz, which turns out to be a very problematic range in my room and I suspect virtually all rooms below 2000 square feet, as they say.  They are manufactured with foam and carbon.

These might even work better than my electronic bass trap eTrap from Bag End, though at 30x60 it's rather large for my room and wouldn't easily be integrated without losing a crucial bookcase or something.

Tuesday, May 23, 2017

Master 7 Triumphant!

The Audio GD Master 7 Singularity arrived on Monday morning, 5 days after being shipped by the factory in China.  It immediately vanquished all my fears and doubts.  Packed perfectly, handled perfectly, and smell free in every level of wrapping.  I didn't recall selecting Air Freight but if that was what this was, I'd do it again.

I let it rest for a few hours in the living room, then unpacked and set it up, then warm up with the power amp unpowered.  Upon unwrapping I immediately had to place it in it's designated location atop the marble slab (where the Audio GD Dac 19 Anniversary Edition had been until minutes before) because there's no other free space large enough in my home to rest it on except the dirty carpet.  When you get the Grand Piano, you have to live around it.  This impressive looking unit is as large as I imagined, but not quite as heavy as I imagined, though certainly no lightweight.  It's large because doing things the right way from end to end takes a lot of well engineered circuits and parts.  To get tiny, you need to make compromises.

Also immediately, it was clear that this was not the kind of problem unit I had feared.  The hoped-for combination of greater sweetness with greater transparency was obvious, though to appreciate it fully took a few hours, listening to many things I couldn't listen to for years, now revealed with such clarity and sweetness it became possible again.  There was never a sense of needing to "turn it off" even playing the unplayable, at very loud levels, and the often more challenging very soft levels.

My audio perfectionist friend agreed that having the voltage set to exactly what's required to drive the power amp to peak power is best, and not waste resolution on useless voltages.  And it seems that Audio GD did exactly as I had ordered, to achieve the optimal spectral balance I needed to raise the subwoofers and super tweeters by 1.5dB, the change from 2.5V max of the old unit to the 3.0V of the new unit.

The slightly astringent quality of the old system with the cheaper DAC is now gone, replaced by endless depth and richness.  What I wasn't expecting was how all the imaging became MUCH more solid and correctly located between and behind the speakers.  That's the virtue of dual mono construction and fully balanced operation and connection!

I haven't done any technical tests, not even measuring the voltage, but I don't think I have to.  It couldn't be THIS good without having nearly unmeasurable distortion, state of the art resolution, and so on.  And it wouldn't have this level of transparency if they had slipped me the NOS version by accident.

Truth be told I don't know how much of the improvement comes simply from using balanced inputs on the Krell, in my system especially.  The Krell isn't powered through the same conditioner as everything else, and though I've never noticed a ground loop, at some level there must be current flow through shield grounds, and the effect of that is virtually eliminated by balanced connections, among their many other advantages.  Mind you, with some equipment in some configurations it is unnecessary and perhaps even suboptimal, but in my system, balanced drive of the power amplifier was a too long overlooked requirement.  (Actually, I tried balanced operation many years ago when it was being power by Behringer DCX crossover, but I feared probably erroneously that it was leading to the excess heating in one channel--the problem that was ultimately fixed by getting the full Capacitor Service from Krell.)

But I also know now that 1704's aren't being used correctly except in differential mode, and better yet parallel differential, as all the big name DAC's from Levinson and others did back in the day they were still being built with the best PCM chip ever.  The potential of this chip is lost without differential operation.

So now, everything is being done right, and it sounds that way.

Sadly for the rest of you, this unit is part of a very limited production using the very last unused Burr Brown 1704's which Audio GD scoured the world for (becoming, ultimately, the biggest name in audio to rely on them, after Lite Audio bailed a few years earlier on making 1704 balanced units).  In future, and for replacements, it looks like 1704 lovers will be scavenging other old salvage units for the super special unobtanium parts.  Eventually, possibly, even better hybrid R2R technology (such as used by MSB) will trickle down to non-stratospheric prices.  Audio GD is trying their hand in that game, but it might be awhile before they can reach the same levels as they had with 1704's, let alone MSB.  Then again, I don't really know if even an MSB Platinum or whatever would sound better than the dual differential 1704's in my Master 7.

Anyway, it's hard to imagine something being even better than this, but that's what I thought about the Audio GD Dac 19.  But I've got what I need for now, I think.  (This was a kind of record setting audiophile purchase for me, I believe the most expensive audio component I've ever purchased brand new, and among things not so qualified only the Krell amplifier cost more.  So I hope it's enough for awhile, the forseeable future.)

I'm connecting the DAC output to the Krell amp with Nordost Baldur audio interconnects I bought awhile back at deep discount, and actually for making the Oppo BDP-95 to Lavry AD10 connection, but I decided I preferred antique Denon players with unbalanced outputs so I haven't needed it since.  The Baldur cables are thin and extremely "fast", which generally means little stored energy.  I don't really care how technically fast the cable is, delaying my experience by a matter of picoseconds is not of any consequence, but that's a good indicator for stored energy because stored energy, as such, is not so easily quantified.  Anyway, these are clearly well made high performance cables that are very transparent sounding, which is what I want.  I'm in no rush to find something better, and they turned out to be exactly the 18 inches required.  Compared to many audiophile cables, they are just good cables, nothing to equalize this way or the other, though you could argue the capacitance is a tad higher than necessary at 20pF / ft.  Belden 1800F does better, at 13 pF/ft.  This is of little consequence for me...you could calculate the low pass for a total of 30pF for my cable vs 20pF for the Belden, into 50k ohm load, with a 10 ohm source impedance.  This will be so high in the Mhz you might think the higher capacitance not such a bad thing at all, but anyway, there's another issue here, and that is simplification.  When they say about interconnects that capacitance is the only thing, they're wrong, it's the only thing that goes seriously wrong in ordinary cables.  In audiophile cables, many other things can go wrong.  But possibly, if nothing is done seriously wrong, additional things be done more right, the things of the highest consequence of all, and that is smearing or not smearing information.  And at that level, dielectric absorption is occurring through complex geometries at every point through the table, and interacting with the complex geometries of magnetic and electric fields.  This may or may not cause excess stored energy at various frequencies.  You could argue...these stored energy effects are at such high frequencies I don't care, I care about capacitance that rolls off at 10kHz.  But, when the capacitance isn't going to cause any rolloff until 5mHz anyway, why not arrange to have it balanced with the electric and magnetic fields not to store energy and therefore smear transients in any way.  Since the smearing can be a nonlinear thing, it can ultimately induce the possibility of something being heard differently, as say some tiny threshold is met either synchronously or not with some other.

The input connection is currently being made through the SPDIF input using two cables and a converter box, the latter being a HOSA which converts AES balanced to SPDIF, and the former being standard Canare and Beldon cables.  This is exactly how I connected the SPDIF input of the Dac 19 which had no AES input.  I've just ordered two appropriate-looking 5 ft AES cables now that I have an AES-input DAC: an Audioquest Cinnamon, and a Geistnote Canare.  The Cinnamon appeals to me because solid core conductors, and everything is silver plated, even the braided shielding.  Silver plating is absolutely what you need to do for best ultrasonic signal transmission, and AES is critically reliant on that.  Professionals may be more interested in the ability to resist stress fatigue of stranded wires.  The Geistnote is a souped up Canare (I got the extra special connectors too) and I like the extra covering which makes the wire run more straightly, which I think is preferable.  I think the Geistnote will be my backup cable, but we'll see.  I looked at all the pro cables and none used silver plating or tinning to protect the copper surfaces.  So, just at that level, I figured universally available Canare basically as good as Gotham, Mogami, or Belden.  As it turns out, I've most often used Canare AES, though my most recent special purchases were Mogami Gold and Geistnote, and I liked the latter the best.  Among the high end cables, Cinnamon is the least expensive with the key features including silver plated solid conductors and shielding.  It's far less expensive than anything else with the key features, and I have seen no other features worth buying.  I trust Cardas construction most of all, and Cardas used to make a 'plain' AES but now only seem to sell the high priced Clear.

AES has gotten a bad rap because of jitter.  Nowadays many will argue even coax spdif is better.  Coax has a peerless ability to transmit high frequencies...hence coax has always been used in radio.  The 110 ohm AES cable is not quite as good as coax.

But, and it's a big but, in a complex system there may be more significant concerns.  Even the tiniest of ground current flows can upset detecting the moment of signal transitions in an unbalanced low voltage signal.  So AES is probably better if you are doing more than just one digital connection.  That was what it was engineered for, and, as it turns out, kinda what I am doing.  AES works well for me with my pro-audio DSP's, sampler and DACs.  And done rightly, the differences in jitter are not going to be a big deal compared to "the ultimate" I2R, which I cannot imagine when I will be using if I ever can.









Saturday, May 20, 2017

10 analog inputs!

My living room equipment rack now has 10 analog inputs, after my having piggy backed the 5 input dB 5 way selector (with Teflon jacks...the upgraded version) on top of the main selector I have been using, recently modified for zero load and zero pass resistance through the tape outputs which I use, the Aragon 24k, which itself has 6 inputs but I must use one to connect the second switch.

Ahh, preamps have never had enough inputs...and now for some time the "preamp" itself has been obsolete or something, though the impressive preamps nevertheless being built approach unimaginability in previous less high high end audio.

Having lots of analog inputs is freedom, just like having analog inputs at all.  It is freedom I cherish.  Digital connections come with policies, DRM, and hidden stuff like jitter and garbage.  While somewhat jitter prone, SPDIF and AES are at least free and open and I like them, but Analog is even better, Analog is free and pure.  Even when generated by digital devices like DVD-Audio players.

Anyway this finally enabled me to make a "permanent" connection of my two tuners to the input hub where the selected analog input gets converted to 24/96 digital by an amazing Lavry AD10.  Everything needs to either be digital or converted to digital to be used in my system, which is based on mind boggling DSP.

Somehow, I don't know, but it seems like liberating the analog signal from various disc players and reconverting that to 24/96 digital sounds better than using the raw digital, in every test I've ever run, and in complete contradiction of (reason?) established practice by virtually everyone else.

Anyway giving the tuners this super high quality AD conversion rather than the pedestrian 16/44 conversion through Sonos, clearly wakes them up, they are sounding fantastically better.  And now I notice finally the Jazz station I've been supporting for years has finally cleaned up the analog distortion they were adding to their signal in large amounts.  I'm loving FM now, more than ever though the 24/96 conversion.  I made numerous previous attempts to do this, btw, which ended in failure.  Back in earlier times, before my rack of last year, back when it was hard to get behind stuff to make even the most basic connections.  (And, btw, a preamp or selector switch amalgamation NEEDS a shelf all it's own, so the "permanent" connections can be constantly revised, as it seems they often are.)  Back then, earlier attempts resulted in motorboating sound from the tuner tuned to the classical station, and just plain distorted (even more) sound from the equally superior tuner tuned to the Jazz station (each connected to the better antennas for each).  But now, apparently with cleaner wiring and the ability to reach behind the tuners and properly adjust their variable outputs is making this work, finally.

I need to have whole house audio based on 24/96, with unlimited analog inputs, and access to libraries and streams (always, all commerical products put digital libraries and streams ahead of analog, at least Sonos grudgingly provides analog inputs, that's why I chose them and have stuck with them so far, but it's been clear for a decade that I need to make my own no-compromises system to do this, and nobody else does).

And yes I think a decent selector or preamp should have 10 unbalanced analog inputs, and at least 5 balanced inputs, balanced output, and simple switched polarity converter taking advantage of balanced output (and assuming the destination device has real balanced input).

There's never enough.  It's always the unconnected things you need to get connected, and the "reference" connected devices you've grown tired of.




Thursday, May 18, 2017

Measurements of a Singularity 19 DAC

These measurements do not look good at all.

When I get my Audio GD Master 7 Singularity, I will be measuring it!

(Previously, I didn't think I needed to, after all, my DAC 19 is perfect, or so it has seemed...)

I'm glad I discovered Super Best Audio Friends also...they're doing a lot of what I hoped to be doing: measuring and publishing.  (It seems more often I do one or the other but not both for some reason.)